2-Function Wireless Hydraulic Control Valve System

Item #: 001-8680

Availability: In Stock

$995.00

Quick Overview

2-Function Wireless Control Valve System will allow you to control a hydraulic hand lever remotely. The system comes complete with an actuator, a wireless controller, and all the mounting hardware.

Actus Actuator

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Actus Actuator
  • Wireless Lodar controller
  • Boxes

Product Description

2-Function Wireless Hydraulic Control Valve System will allow you to control a hydraulic hand lever remotely. The system comes complete with an actuator, a wireless controller, and all the mounting hardware.


ACTUATOR SPECIFICATIONS


Operating voltage:  10.3 – 16 VDC, 12VDC nominal
Output Force (Dynamic) Load:  60-lbf @ 3 amp (267 N)
Output Force (Holding) Load:  150 lbs (68 kg)
Motor current (at rated load):  2.25 amps
Motor locked rotor current:  18 amps
Clutch current:  0.6 amp
Stroke (max):  2.5 inches (63.5 mm)
Maximum no load speed:  1.5 inches/second (38.1 mm/s)
Weight:  3.6-lbs (1.6 kg)
Operating Temp Range:  -40°F to 158°F (-40°C to 70°C)
Mounting:  Pivot mount
Construction:



  • Aluminum die cast housing

  • E-coated for corrosion resistance

  • Permanently lubricated metal gear drive

  • Stainless steel output shaft

  • Sealed construction

  • Dust proof and splash proof

  • Industrial grade rod seal

  • 4-start stainless steel screw

  • 4-wire, 20-gauge, shielded cable; 3 feet long with connector


 


LODAR STANDARD TRANSMITTER 


SPECIFICATIONS


Switch:  Tactile dome


Battery:  9V Alkaline Manganese


Current draw:  20 milliamps (operating)



PROTECTION


Reverse polarity:  Protected


IP rating:  55


Conformal coating:  No


Registration codes:  Over 16 million 


 


PERFORMANCE 


Temp range:  13°F to 104°F


Operational range:  200 ft.


Transmitted power:  1mW typical 


COMPLIANCE


EMC:  Exceeds ETSI 300 220


Modulation:  FM


Frequencies:  418 MHz F1D


 


LODAR STANDARD RECEIVER


SPECIFICATIONS


Output switching:  Relay


Operating voltage:  8 - 40 VDC maximum, 12/24 VDC nominal


Current:  5 amps


Internal antenna:  Supplied and fitted


External antenna:  Available accessory


Outputs:  Master


Configuration:  Optional RS 232 programming


Performance:  Simultaneous outputs with programmable interlocks


Diagnostics:  5 volts LED


 


PROTECTION


ESR Safety


Reverse Polarity


Back EMF


No Conformal Coating


Over 16 million registration codes


STOP Connection


 


WIRING


Wiring Loom:  120” supplied and fitted


Cable Gland:  Supplied and fitted


Connections:  60” supplied and fitted with a connector



ENCLOSURE


Weight:  0.3 lbs


Lid:  Black PVC


Base:  Black PVC


Breather:  Gortex fitted in base


Housing mounts:  4 external mounting holes


Mounting hardware:  3/16” (not supplied)


IP Rating:  IP67 standard

Additional Information

Operating Voltage 12VDC
Availability In Stock